Child pages
  • Selecting the disks for video archive storage

Documentation for Intellect 4.9.8. Documentation for other versions of Intellect is available too.

Skip to end of metadata
Go to start of metadata

INTELLECT™ software performs video archiving to a storage device. When INTELLECT™ is installed, set the local disks to save the archive to in the Hardware tab of the Computer object.

Note.

 Use disks with the NTFS file system for storing the archive. If the FAT32 file system is in use, then there can be problems caused by this system, for instance — it has no logging. 

To select the disks for the archive, do the following:

  1. Go to the Hardware tab in the System settings dialog box (1).
  2. Select the Computer object corresponding to the configured Server in the objects tree of the Hardware tab (2). The settings panel for the selected object is displayed on the right of the Hardware tab. Each local disk available for archiving has the check of the same name in the Disks for storing the archive group (3).
  3. Set the relevant check in the Video column next to the disk to be selected. Local, network and USB disks are available for storing (details on adding network disks are in Using network disks section).

    Note.

    For the reverse effect set the checkboxes corresponding to the disk unchecked in the Video column.
  4. Click the Apply button (4).

The disks for video archive storage are now selected.

Note.

If no disk for storing the video is selected, then there is no storing to the archive.
  • No labels