Go to documentation repository

Contact technical support

Page tree

Documentation for Intellect 4.10.4. Documentation for other versions of Intellect is available too.

Previous page Features of Dynacolor IP device configuration  Features of Cisco IP device configuration Next page


Skip to end of metadata
Go to start of metadata
On the page:

 

Note

Detailed description of the given devices can be found at https://www.stream-labs.com/products/

Features of Wave Cam M5 camera

  1. Automatic brightness control. In this mode Intellect automatically uses internal algorithm of image’s brightness control. This mode is enabled when the Brightness slider is set to a minimum position. When there are no special requirements to the image, then this mode of brightness control is recommended.

    Note

    Brightness can be controlled manually, moving the Brightness slider.

  2. Video stream frame rate. Wave Cam M5 camera supports two channels of video displaying.  When only one video channel is engaged in Intellect, the video stream frame rate is 25 fps. When both channels are engaged, frame rate of video stream for each channel is 12fps.
  3. Telemetry. Wave Cam M5 camera is not a PTZ device. One can control some area of an image with the help of video surveillance monitor. While configuring the Telemetry on a Wave Cam M5 camera, do the following:
    1. Select the protocol of data exchange with a camera - IP-Camera (on the settings panel of the Telemetry control object).
    2. Apply PTZ device to the first video input channel (is set in the Channel number list on the settings panel of the Camera object).
    3. Apply telemetry control panel to the first video input channel (is set in the Channel number list on the settings panel of the Camera object).

Note

The image will move through the second video input channel.

Features of Wave Server Enterprise hardware internetwork

  1. Video stream frame rate. When only one camera is connected to Wave Server Enterprise hardware internetwork, the video stream frame rate is 25 fps. When two or more cameras are connected, total frame rate of processed video is 16 fps.

    Note

    If two video input channels are used, then frame rate of processed video is 16/2=8 fps. If there are four video input channels, then 16/4=4 fps

  2. Telemetry. Telemetry is performed on an individual card with its own network interface. To configure it, do the following:
    1. Select the protocol of data exchange with camera with the help of which an analog camera connected to the video server is controlled on the settings panel of the Telemetry control object (for example, Pelco-D, Pelco-P, Panasonic-850).
    2. Create two Video Capture Device objetcs.

Note

For every analog camera connected to Wave Server Enterprise, two Camera objects are to be created under different Video Capture Device objects for video viewing and telemetry configuration correspondingly.

Features of Wave Server WH1501 video server

Telemetry. When telemetry for Wave Server WH1501 video server is configured, it is necessary to select protocol with the help of which the analog camera connected to the video server is controlled,  on the settings panel of the Telemetry control object (for example, Pelco-D, Pelco-P, Panasonic-850).